Pin It button on image hover

Saturday 10 March 2018

Country Cottage Scene (by Anne)

Good morning. This is one of my recent show samples with the scene building stamps. I have created a step by step for you, ‘warts & all’ as I made a bit of a mistake with masking! I think that I disguised it reasonably well – tee hee.
Materials:
  • Stamps: Landscape edges (wall and background skyline), Village Life (trees), Townhouses (trees & bushes), English Cottages (cottage, trees & bushes, post box)
  • 8 X 8 inch card blank and stamping card (smooth white)
  • Scrap copy paper (needs to be thin) and temporary glue adhesive (such as zig 2 way glue) or masking tissue
  • Watercolour pens and inks (yellow, orange, brown, turquoise, bright green, olive green, red, pink, grey and black)
  • Fine tipped water resistant pen (black and opaque white)
  • Alcohol marker (black)
  • Versafine (Onyx Black)
  • Pebeo Drawing Gum (masking fluid)
Step by Step:

Planning a rough layout.
The first thing that I do with a set of scene building stamps is to stamp all the elements onto scrap copy paper and roughly cut them out. I then use these to plan a scene, laying them out onto my project to decide on placement. Individual elements that may be needed to create masks (e.g. buildings, trees, bushes etc.) I cut around carefully. Any elements that are silhouette stamps (e.g. solid black trees, branches and foliage) don’t need to be masked so I just cut around roughly. I keep all these cut out elements to use again for future projects.

Stamp the post box and cover with the mask before stamping the wall. Using masking you work progressively from foreground to background. Masking ensures that element sits in front of the one behind. Don’t worry too much if you get a few gaps in the image around the masked elements, these are easily corrected with a fine tipped pen.
I put a couple of dots of zig glue onto the back of my masking pieces. It goes on blue and dries clear, and is then a tacky temporary adhesive for holding elements in place while stamping. If you are using masking tissue this already has a tacky backing.

Next stamp foreground trees and bushes. The foreground bush on the left was masked before stamping the ones behind. Cover the trees with masks.

Continue stamping and masking trees and bushes as you work backwards through the scene.

Continue stamping and masking as you work backwards through the scene.

Continue building the scene using masks as needed. Now can you see where I went wrong? I forgot to mask the bushes on the right hand side of the cottage! You can see the base of the house through the bushes. Eeek! I decided to leave it and try and cover up the mistake with the colouring.

Stamp the clouds along the top and the birds into the sky.  Mask the foreground tree and stamp the silhouette tree on the right.
Use the fine tipped pen to draw in elements and extend the background. Try to ‘go with the flow’ and just quickly draw. Rather than solid lines try and be a bit sketchy with light touches, dots & dashes. To give the illusion of perspective draw the path wider as it gets nearer the front of the scene. Draw a letterbox and scribble text onto the post box.
Next cover the cottage and trees using the Drawing Gum. This masking fluid is brilliant. I had always been used to the older stinky rubbery style masking fluid that ruins your brushes. This fluid is fabulous, it paints on easily and washes out instantly with water (treat it as you would an acrylic paint and wash brushes immediately – it will ruin your brush if you let it dry on).
It is not essential to mask before colouring but this makes it much easier to slap colour across the background and leave the elements protected.


Apply ink colours (or watercolour washes) across the background. Work freely working ‘wet in wet’. I used intense coloured inks to create a vibrant scene.

When the background is fully dry rub away the masking fluid.

Now colour the rest of the scene. I used watercolour pens and a damp brush, picking up colour scribbled onto my palette.
Use the fine tipped pen to draw in a few extra details, adding grasses and texture to the path. To keep perspective draw them slightly larger towards the front and reducing in size as you go back. Use the opaque white pen to add a few highlights.
Finally edge the scene with black marker to frame and mount onto the card front.

8 comments:

  1. Wow!! A so lighty and colorful scene, love it!! Thanks so much for the step by step tutorial!

    ReplyDelete
  2. This is a very complex scene and from your step by step can understand better how you put it together and achieved that really beautiful bright and pretty finished scene Anne. I think the slight masking mistake really didn't show much in the first place, and definitely not at all on the finished piece. x

    ReplyDelete
  3. Thank you! I have just posted on a previous 'scene' that I struggle with them and here you are with a wonderful tutorial! It's a gorgeous finished result and a great help to me for sure! ;)

    ReplyDelete
  4. AWESOME! Fabulous scene you have created and thank you for guiding us through how to recreate this scene. I love it.
    Hugs
    Linda xxx

    ReplyDelete
  5. Oh my goodness what a wonderful scene Anne, I love the bright strong colours you've used and the composition of stamps. Thank you for the who to, it all looks complicated, I love it, Kate x

    ReplyDelete
  6. Beautiful, love your bright bold colours.

    ReplyDelete
  7. Thank you so much everyone for you lovely comments xxx

    ReplyDelete

Thanks so much for leaving a comment - it brings a little ray of sunshine into our day when we know our work is appreciated!